Room Planner
Add cabinets, furniture, and decorations to a room
Use saved cabinet designs, templates, the furniture catalogue, or personal models and position each item safely.
On this page
Use Furnish after the measured room and openings are stable. Cabinets and furniture are different object types: a cabinet stays structurally editable in Shelf Maker, while catalogue furniture uses the supplied product model and dimensions.
Add a cabinet
Open Furnish → Furniture → Cabinets → Add cabinet and choose:
- Your designs for a named cabinet saved in your Library. This area may ask you to sign in.
- Template for a searchable Supernata starting design grouped by furniture category.
Placing a cabinet clones it into the room with new identifiers, so the saved source design remains independent and you can place more than one copy. The planner chooses an initial free position and selects the new cabinet for adjustment.
Add catalogue furniture
Open Furniture → Catalog, browse or search by product, brand, or category, and choose a color variant before placement when several are available. A floor item is placed on the floor; a wall item is attached to a wall; a surface decoration belongs on a supported cabinet or furniture top.
Use the product dimensions shown in the inspector. Catalogue products are planning representations and are not resized merely to make a crowded plan work.
Move, rotate, and inspect
- Drag a floor item to move it. Room Planner snaps to useful wall, room, and neighbouring-object alignments when the candidate remains valid.
- Use Rotate 45° or the rotation handle to change a floor item’s direction.
- Use Raise, Lower, and Flip for a supported wall item. Raise and Lower move it 10 cm at a time.
- Select an item in 3D to see its distances to walls, openings, and nearby objects. In Plan, turn on Dimensions to see them.
- Use Fit to screen or select the item in Structure when it is difficult to find.
A placement can be rejected if the footprint leaves the room, intersects another object, crosses a wall, occupies an opening’s protected zone, exceeds the ceiling, or no longer fits its wall. The invalid preview is a warning; it is not a suggestion to ignore site access.
Type distances on the chips
The distances of a selected furniture item are chips you can type on. Typing one moves the item by exactly the difference; see Type an exact value on a chip.
- A floor item has a clearance chip on each side, to the nearest wall or object. Typing one moves the item along that line. This works when it is the only item selected; with several selected, the chips only read.
- A wall-hung item has a chip along the wall on each side, to the nearest corner, door, window, or other wall item. In 3D it also has its height from the floor and its gap to the ceiling.
- A ceiling item has a chip from its centre to each wall of its room.
A value that does not fit is refused with the reason, such as It does not fit there. There is no position form: drag the item or type its chips.
Wall-hung cabinet height
Select a wall-hung cabinet, or a wall board from Shelves & panels, and an amber ↑ chip under it in 3D shows the height of its underside above the floor. Tap it and type the height. The cabinet moves straight up or down and keeps its place along the wall. A height that does not fit is refused with the range that does. The same chip sets the height of a wall-hung cabinet that hangs beside floor-standing ones in one run, such as a TV console next to a tower; read Mounting, legs, panels, and rounded corners.
Edit a cabinet without losing the room
Select a cabinet and choose its Shelf Maker edit action. Room Planner hands the same cabinet to Shelf Maker while keeping the room project as the owner. Edit dimensions, compartments, doors, drawers, shelves, accessories, and finishes, then choose Finish & return to go back to the same room and placement.
A slot-created cabinet can have locked outer dimensions because it was designed for a marked volume. Adjust its internal structure without defeating the measured fit.
Add decorations in focus mode
Select a supported floor cabinet or furniture item and choose Decorate. Focus mode isolates that host and lets you add compatible surface decorations. New decorations are checked against the host top or open bay and spread around it instead of all landing at the same centre. Select Done to return to the full room.
Personal models
Use My models for a static GLB that is not in the catalogue. Personal models have their own file, storage, scale, and sign-in rules; read Import personal 3D models before uploading one.
When a specific gap must be filled, use Mark and fill an empty space instead of guessing at placement.
Still need help?
Contact us with the studio, device, and what you were trying to do.