Plan a room

Room Planner combines a measured plan with an editable 3D room. Use it to check placement, circulation, and the relationship between several furniture pieces.

Draw the room#

1. Open Room Planner and enter Build mode.
2. Choose the room drawing tool.
3. Click or tap to place wall points, then close the outline.
4. Select a wall or dimension label to enter a precise measurement.
5. Add doors and windows, then place them on the correct wall.

You can also add partitions, adjust room finishes, and switch between plan and 3D views while checking the geometry.

Furnish the space#

Switch to Furnish mode. Add cabinets from your designs or furniture from the catalogue, then drag and rotate them into position. Select an item to open its inspector. The planner can warn about fit or placement, but you should still check real clearances, door swings, and installation access.

Lighting and play modes#

Use Lighting to place and tune supported lights. Play contains interactive room features where available. These modes do not replace the measured Build view; return to the plan whenever a dimension matters.

Move between room and cabinet editing#

Select a cabinet in the room and open it in Shelf Maker when its internal structure needs work. The Finish & return action takes you back to the same room project. A standalone Shelf Maker draft remains separate unless you explicitly open it as a new room project.

When the plan is ready, use Share to create a review link or open combined room and cabinet drawings.